Hobbyist to Commercial

Metal Workshops Built for Real Work

Start with Hearth financing, then budget your slab or engineered foundation separately. Metal workshops start at $8,500 once the site is ready. Sizes from 24x30 to 40x60. Built for 220V electrical, insulation, and heavy use. Every workshop is 140 MPH wind certified, and panel warranty coverage depends on the steel package you choose.

Call Denton: (940) 320-9377 Call Wichita Falls: (940) 249-5015

Google Reviews

4.9★ Google rating from real North Texas buyers

Check our reviews before you buy. We are not hiding behind a form and a PO box.

View Denton reviews View Wichita Falls reviews

Denton Showroom

8210 W University Dr, Denton, TX 76207

(940) 320-9377

Google listing Directions

Wichita Falls Showroom

4390 Bonny Drive, Wichita Falls, TX 76302

(940) 249-5015

Google listing Directions

Hearth financing available

Check your rate with no impact to your credit score

Compare lender options for a metal workshop through Hearth with one application. Hearth Concierge gives you a real person to help with lender paperwork and next steps if you decide to move forward.

Building delivery and professional installation stay included. Site prep, concrete, pads, permits, and utility work are still customer-provided and should be budgeted separately.

Check Your Rate with Hearth See financing details

Financing offers, rates, and terms vary by lender, credit profile, and project details.

Financing is provided by third-party lenders through Hearth, a licensed broker (NMLS # 1628533). Hearth does not make loans or credit decisions.

Check your financing options with Hearth

Finance your metal workshop with Hearth first

Hearth is the primary financing path we now lead with for steel buildings and other larger qualifying projects.

We keep this simple and honest: promotional financing depends on lender, credit profile, and project details. Good fit does not mean guaranteed approval.

Soft-pull rate check before you decide whether to move forward
Qualified buyers may see promotional financing options from participating lenders
Hearth Concierge follows up with a real person for lender steps and documents
Site prep, concrete, permits, and utilities should stay in a separate project budget

Check Your Rate with Hearth

Financing is provided by third-party lenders through Hearth, a licensed broker (NMLS # 1628533). Hearth does not make loans or credit decisions.

All loans are subject to credit approval. Rates and terms vary by lender and creditworthiness. Checking your rate will not affect your credit score.

If you use a Hearth application or widget on our site, please review our Privacy Policy and Hearth's Privacy Policy.

Foundation-first planning

Get financing lined up first, then match your building quote to the right site-prep budget. We handle the building delivery and professional installation. You handle the concrete slab.

Customer provides the concrete slab before install day
We provide layout, anchoring, and foundation specs before your concrete or pad crew starts
Free delivery and professional installation stay included in the building price
Pricing and monthly payment planning should always account for site prep, concrete, and permit costs

Site prep is separate

Concrete, gravel, grading, retaining, and drainage are not bundled into the base building price.

Install stays included

Once your site is ready to spec, our crew delivers and installs the building at no extra charge inside our service area.

Monthly payment planning

See what your metal workshop could look like as a monthly payment

Check payment options with Hearth, compare lender offers with one application, and see what monthly payment planning could look like for your project.

This is not just rate shopping. Hearth Concierge follows up with a real person who can help you finish the application and walk through lender document steps if you want to move forward.

Budget the building first, then keep site prep, concrete, permits, and utilities as separate line items.

Financing is provided by third-party lenders through Hearth, a licensed broker (NMLS # 1628533). Hearth does not make loans or credit decisions.

All loans are subject to credit approval. Rates and terms vary by lender and creditworthiness. Checking your rate will not affect your credit score.

If you use a Hearth application or widget on our site, please review our Privacy Policy and Hearth's Privacy Policy.

Check your rate with Hearth

Permit-Ready Specs for Your 30x40 Steel Building

Steel buildings in North Texas are engineered to ASCE 7-22 wind and snow load standards. Most jurisdictions require these parameters when you apply for a building permit. A 1,200 sq ft structure used for shop and workspace use typically requires a permit — here is exactly what your local building department will ask for.

ASCE 7-22 Design Parameters

Design Wind Speed — 140 MPH (3-sec gust, ASCE 7-22)
Exposure Category — B (typical North Texas sites)
Risk Category — II
Ground Snow Load — 20 psf (Infinity standard)
Foundation — Per engineered drawings

How to Get Your ASCE Report

1Visit ascehazardtool.org
2Enter your site address
3Select Risk Category II
4Download wind/snow parameters
5Share with us on your quote

Have your ASCE report? Send it with your quote request →

Start Your Quote

Permit & Wind Load FAQ

What wind speed do steel buildings in North Texas need to be rated for?

Most jurisdictions in North Texas require buildings rated for 130–140 MPH 3-second gust wind speed under ASCE 7-22. Our steel buildings are engineered to 140 MPH as standard, which meets or exceeds permit requirements for Wichita County, Denton County, and surrounding areas.

Do I need a snow load calculation for a steel building in North Texas?

While North Texas is technically in a 0 psf ground snow load zone per ASCE 7-22, our Infinity Carports steel buildings are engineered to 20 psf snow load as standard — well above the local minimum. This exceeds code requirements and gives your structure extra safety margin for unexpected ice or snow events.

What is Exposure Category B and does it apply to my property?

Exposure Category B is the default assumption for most North Texas residential and light commercial sites with normal neighborhood, suburban, and small-town obstructions. If your site sits in wide-open terrain with very few obstructions, ask your engineer or permit office whether Exposure C applies.

More questions? See our full permit requirements guide for Denton & Wichita Falls, TX →

Workshop Sizes & Pricing

Whether you need a hobby space or a full commercial shop, we have a workshop size that fits. Custom sizes are available too. If climate control is part of the plan, read our metal building insulation guide before you lock in your wall and roof assembly.

24x30 Workshop

720 sq ft

From $8,500

Great for hobbyists. Room for a workbench, tools, and one project vehicle.

30x40 Workshop

1,200 sq ft

From $14,000

Our most popular workshop. Multiple work zones with plenty of room.

30x50 Workshop

1,500 sq ft

From $18,000

Extra length for bigger projects. Ideal for woodworking or fabrication.

40x60 Workshop

2,400 sq ft

From $25,000

Full commercial shop. Run a real business out of this building.

Built for Serious Work

220V Electrical Ready

Run welders, compressors, table saws, and plasma cutters. Plan your panel layout and we build around it.

Insulation Options

Keep your shop comfortable year round. We install insulation during the build so you can work in any season.

140 MPH Wind Certified

Engineered for Texas storms. Your tools and projects stay safe no matter what the weather does.

Quoted Panel Warranty

Panel warranty coverage depends on the steel package you choose, so we quote the actual panel coverage with your workshop spec.

Tall Ceilings Available

Go up to 20 feet tall. Perfect for car lifts, overhead storage, or just breathing room on big projects.

Custom Layouts

Place doors, windows, and openings exactly where you need them. Your shop, your design.

Who Uses Our Workshops?

Weekend woodworkers who need a dedicated space for tools and projects

Auto mechanics running a side business or full-time shop

Welders and fabricators who need 220V power and ventilation

Artists and craftspeople who need room to create

Small business owners who need a low-cost commercial space

Homeowners who want a real workshop instead of a cramped garage

Explore More Options

Not sure a workshop is the right fit? Check out our metal garages or our built-on-site program for larger custom projects. Financing is available for all sizes.

24x30 Guide 30x40 Guide All Steel Buildings